Skip to main content
Version: 2.7.x

Testing

Backendโ€‹

Unit Testsโ€‹

We use default golang unit tests with "github.com/stretchr/testify/assert" to simplify testing.

Integration Testsโ€‹

Dummy backendโ€‹

There is a special backend called dummy which does not execute any commands, but emulates how a typical backend should behave. To enable it you need to build the agent or cli with the test build tag.

An example pipeline config would be:

when:
event: manual

steps:
- name: echo
image: dummy
commands: echo "hello woodpecker"
environment:
SLEEP: '1s'

services:
echo:
image: dummy
commands: echo "i am a service"

This could be executed via woodpecker-cli --log-level trace exec --backend-engine dummy example.yaml:

9:18PM DBG pipeline/pipeline.go:94 > executing 2 stages, in order of: CLI=exec
9:18PM DBG pipeline/pipeline.go:104 > stage CLI=exec StagePos=0 Steps=echo
9:18PM DBG pipeline/pipeline.go:104 > stage CLI=exec StagePos=1 Steps=echo
9:18PM TRC pipeline/backend/dummy/dummy.go:75 > create workflow environment taskUUID=01J10P578JQE6E25VV1EQF0745
9:18PM DBG pipeline/pipeline.go:176 > prepare CLI=exec step=echo
9:18PM DBG pipeline/pipeline.go:203 > executing CLI=exec step=echo
9:18PM TRC pipeline/backend/dummy/dummy.go:81 > start step echo taskUUID=01J10P578JQE6E25VV1EQF0745
9:18PM TRC pipeline/backend/dummy/dummy.go:167 > tail logs of step echo taskUUID=01J10P578JQE6E25VV1EQF0745
9:18PM DBG pipeline/pipeline.go:209 > complete CLI=exec step=echo
[echo:L0:0s] StepName: echo
[echo:L1:0s] StepType: service
[echo:L2:0s] StepUUID: 01J10P578JQE6E25VV1A2DNQN9
[echo:L3:0s] StepCommands:
[echo:L4:0s] ------------------
[echo:L5:0s] echo ja
[echo:L6:0s] ------------------
[echo:L7:0s] 9:18PM DBG pipeline/pipeline.go:176 > prepare CLI=exec step=echo
9:18PM DBG pipeline/pipeline.go:203 > executing CLI=exec step=echo
9:18PM TRC pipeline/backend/dummy/dummy.go:81 > start step echo taskUUID=01J10P578JQE6E25VV1EQF0745
9:18PM TRC pipeline/backend/dummy/dummy.go:167 > tail logs of step echo taskUUID=01J10P578JQE6E25VV1EQF0745
[echo:L0:0s] StepName: echo
[echo:L1:0s] StepType: commands
[echo:L2:0s] StepUUID: 01J10P578JQE6E25VV1DFSXX1Y
[echo:L3:0s] StepCommands:
[echo:L4:0s] ------------------
[echo:L5:0s] echo ja
[echo:L6:0s] ------------------
[echo:L7:0s] 9:18PM TRC pipeline/backend/dummy/dummy.go:108 > wait for step echo taskUUID=01J10P578JQE6E25VV1EQF0745
9:18PM TRC pipeline/backend/dummy/dummy.go:187 > stop step echo taskUUID=01J10P578JQE6E25VV1EQF0745
9:18PM DBG pipeline/pipeline.go:209 > complete CLI=exec step=echo
9:18PM TRC pipeline/backend/dummy/dummy.go:208 > delete workflow environment taskUUID=01J10P578JQE6E25VV1EQF0745

There are also environment variables to alter step behavior:

  • SLEEP: 10 will let the step wait 10 seconds
  • EXPECT_TYPE allows to check if a step is a clone, service, plugin or commands
  • STEP_START_FAIL: true if set will simulate a step to fail before actually being started (e.g. happens when the container image can not be pulled)
  • STEP_TAIL_FAIL: true if set will error when we simulate to read from stdout for logs
  • STEP_EXIT_CODE: 2 if set will be used as exit code, default is 0
  • STEP_OOM_KILLED: true simulates a step being killed by memory constrains

You can let the setup of a whole workflow fail by setting it's UUID to WorkflowSetupShouldFail.